[Solved] BSOD on Windows 8 - Driver Overrun State Buffer

BSOD on Windows 8 - Driver Overrun State Buffer

I have copied the mini dump to onedrive along with the output from MSINFO.
 What tool can I use to read the minidump to understand the driver that is causing the problem.
 I suspect it is the audio driver since I don't normally play music on my PC, but it
was playing for 5 minutes before the machine crashed.
 
I have other crash issues that were related to my machine coming back from sleep mode, so I turned that off and it went away.
 It would be nice to know how I can diagnose the minidump files without having to submit them.
Here are the dump files:
http://1drv.ms/1mIaPSb
Thanks

Solutions to the Problem BSOD on Windows 8 - Driver Overrun State Buffer

Download Error Fixer for Free Now

Hi,
The attached DMP file is of the DRIVER_OVERRAN_STACK_BUFFER (F7) bug check.
This indicates that a driver has overrun a stack-based buffer.

A driver overran a stack-based buffer (or local variable) in a way that would have overwritten the function's return address and jumped back to an arbitrary address when the function returned.
FAILURE_BUCKET_ID:  0xF7_ONE_BIT_MISSING_GSFRAME_nt!_report_gsfailure
^^ Looks like one bit corruption., possibly memory.
--------------------
1.
Uninstall AnyDVD ASAP.
2.
Uninstall any/all Asus bloatware that may be installed.
For example, I see Asus PC Probe.
3.
Uninstall WinPcap ASAP.
4.
If after the above you're still crashing, please run Memtest for NO LESS than ~8 passes (several hours):
Memtest86+:
Download Memtest86+ here:
http://www.memtest.org/
Which should I download?

You can either download the pre-compiled ISO that you would burn to a CD and then boot from the CD, or you can download the auto-installer for the USB key.
What this will do is format your USB drive, make it a bootable device, and then install the necessary
files.
Both do the same job, it's just up to you which you choose, or which you have available (whether it's CD or USB).

Do note that some older generation motherboards do not support USB-based booting, therefore your only option is CD (or Floppy if you really wanted to).

How Memtest works:

Memtest86 writes a series of test patterns to most memory addresses, reads back the data written, and compares it for errors.

The default pass does 9 different tests, varying in access patterns and test data.
A tenth test, bit fade, is selectable from the menu.
It writes all memory with zeroes, then sleeps for 90 minutes before checking to see if bits have changed (perhaps because
of refresh problems).
This is repeated with all ones for a total time of 3 hours per pass.

Many chipsets can report RAM speeds and timings via SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed.
If the expected memory speed is overclocked, Memtest86 can test that memory performance
is error-free with these faster settings.

Some hardware is able to report the "PAT status" (PAT: enabled or PAT: disabled).
This is a reference to Intel Performance acceleration technology; there may be BIOS settings which affect this aspect of memory timing.

This information, if available to the program, can be displayed via a menu option.

Any other questions, they can most likely be answered by reading this great guide here:
http://forum.canardpc.com/threads/28864-FAQ-please-read-before-posting
Regards,
Patrick

In this method we will try to Boot in Safe mode with Networking and see if the error still persists.

• Search "MSCONFIG" and Open.
• Click on Boot Tab
• Tick Safe Boot in Boot Option
• Select Network.
• Click Apply and OK.
• Reboot your System.

Recommended Method to Fix the Problem: BSOD on Windows 8 - Driver Overrun State Buffer:

How to Fix BSOD on Windows 8 - Driver Overrun State Buffer with SmartPCFixer?

1. Click the button to download SmartPCFixer . Install it on your computer.  Open it, and it will scan your computer. The junk files will be shown in the scan result.

2. After the scan is finished, you can see the errors and problems which need to be repaired.

3. When the Fixing part is done, your computer has been speeded up and the errors have been removed

Related: How to Download Toshiba Portege R500 HDD/SSD Alert Utility v.2.2.0.0 driver,Way to Update & Download Toshiba Satellite A355-S69403 Motorola Modem Region Select Utility v.2.2.3.0 driver,Where to Download Toshiba Satellite L305-S5926 HW Setup Utility v.2.00.11 driver,[Solved] Download Toshiba Satellite L675-S7115 Laptop Checkup v.2.0.6.22 driver,Method to Download Toshiba Satellite M645-S4080 Media Controller v.1.1.88.1 driver,Best Way to Download NVidia GeForce 6100 VGA Driver v.304.51 Certified,How Can You Update & Download NVidia GeForce 9300/nForce 730i VGA Driver v.310.19 Certified,Method to Download NVidia GeForce GT 330M Driver v.340.65,How Can I Update & Download NVidia GeForce GTX 590 Driver v.280.26 WHQL,Method to Download NVidia Tesla C2050 Driver v.319.17
Read More: BSoD - 2 errors - \"Page Fault in Nonpaged Area\" and \"System Service Exception.\" [Solved],Troubleshooter of Error: BSOD STOP ERROR 0x0000008E (0xC00000005,0x8206ccc7,0x98FBD91,0x00000000,How Can You Fix - BSOD on Windows 7 Computer?,Troubleshoot:Bypass Windows login screen,Troubleshooting:But my eMachine won't allow IE9 to be my default browser or homepage...,All diagnostic tools give 0x800700C1, troubleshooting wizard can't continue,all files try to open with adobe,all icons on desktop have changed to Adobe icon and won't open,All functions of my outlook are working except it will not let me "REPLY" or start a "NEW" email,all f1-f12 shortcuts not work